TS 300 S stationary carpet shearing machine

The TS 120 U carpet shearing machine is a light but very strong machine for the timely limited operation.

It is very suitable for shearing deep with at the same time a lot of pile removal. The large machine support enables uniform and even shearing. Shearing width 120mm.

The MS 40 Carpet carving machine is the perfect tool for the final finishing of your carpet. You can carve the carpet edge as well as the contours of the design.

Our airdriven MS 40-A is suitable for continuous working and equiped with a industrial motor. Also the carpet carving machine MS 40-A is higly movable, and the maintenance and care is simple. The new vacuum system assists in your work without loosing easiness.

The MTS 300 was constructed for pile shearing of handtufted carpets as well as for shearing off fluff from woven carpets and for removing excessive pile from fitted carpets.

In spite of the considerable shearing width of 300 mm, it can be easiy operated by only one person (similar to lawn mower). Reversing is facilitated by rollers. A simple movement allows infinite adjustment of the shearing depth on a scale and readable.

The MTS 300 VAC is already equipped with an vaccum systyem. This is a big advantage by alreay laid down carpets.

Hand made carpets and hand made rugs can be made with a wide range of designs using this hand tufting gun.

Changing the pile height or yarn colour is very simply achieved with the Hofmann handtufting gun.

The yarn is delivered through a needle that pierces the special backing fabric. When operated as a cut pile gun a blade then cuts through the yarn and a jet of air blows the tuft through. After completing the tufting operation the tufts are bound with latex and a secondary backing.

The Hofmann handtufting gun has reached it present level of success after many years of development and is now used in industry and education throughout the world.

We offer a full range of equipment and materials for the production of hand made rugs, hand made carpets and wall hangings.

The TS 120 U carpet shearing machine is a light but very strong machine for the timely limited operation.

It is very suitable for shearing deep with at the same time a lot of pile removal. The large machine support enables uniform and even shearing. Shearing width 120mm.

The MS 40 Carpet carving machine is the perfect tool for the final finishing of your carpet. You can carve the carpet edge as well as the contours of the design.

Our airdriven MS 40-A is suitable for continuous working and equiped with a industrial motor. Also the carpet carving machine MS 40-A is higly movable, and the maintenance and care is simple. The new vacuum system assists in your work without loosing easiness.

The MTS 300 was constructed for pile shearing of handtufted carpets as well as for shearing off fluff from woven carpets and for removing excessive pile from fitted carpets.

In spite of the considerable shearing width of 300 mm, it can be easiy operated by only one person (similar to lawn mower). Reversing is facilitated by rollers. A simple movement allows infinite adjustment of the shearing depth on a scale and readable.

The MTS 300 VAC is already equipped with an vaccum systyem. This is a big advantage by alreay laid down carpets.