Vacuum packing machine for pillows, quilts and other products

It is used for pressing/crushing/squeezing (reducing the volume of products) of soft, fluffy products. Reducing the volume of the product has an impact on the low cost of transport, saving storage space before the goods are dispatched. We are the only manufacturers to use the possibility of setting a constant temperature of the film sealing strip, which affects the repeatability of the seal. The packaging process takes place when two buttons are pressed simultaneously with both hands, which causes the pneumatic cylinders to descend to the lower position, and the footswitch to lower the heating strip at a later stage. In this extremely simple way, we can reduce the volume of the product by up to a few per cent.

The line includes:

• Buffer tank
• Raw material weighing system
• Two vacuum packing stations
• Control system for the entire assembly including HMI touch panel

The buffer tank is filled automatically by the upstream machine, e.g. carding machine, ball fibre machine, foam shredding machine, etc. A product sensor located at the top of the tank, by detecting the raw material, can automatically stop the feed from the upstream machine. The fill size is selected from the touch panel. The most efficient operation of the machine is during the filling of pillows weighing between 500 g and 1,000 g. After weighing out a preset amount of pillow fill, the raw material is sucked inside the pillow. Two filling stations allow to maintain the production continuity. While at the first station the filling of the cover takes place, at the same time, at the other station the pillow is waiting to be replaced. The filling stations open and close automatically using pneumatics and are triggered manually with two buttons by the operator.

Pillows can be filled with:

• silicone carded fibers
• ball fibers
• polyurethane foam stick
• foam granules
• mixes or anything loose

The following is a machine designed to fill garden pillows, furniture pillows ranging from backrests to seat pillows, teddy bears, beddings to bedroom pillows.

The set is equipped with two work tables with weight control of the final product. Pillows ranging in size from small to the largest can be stuffed and weighed quickly and easily. The process of stuffing the pillows is under control of the operator. Pressing the footswitch starts the ejection of the raw material (ball fibers, carded fibers, foam sticks and foam granules to other loose fillers). It is possible to connect another machine from our range, which can even feed the raw material automatically. The line is safe to use, fully efficient and has intuitive panels.

Carding machine model AM-531 is a machine that quietly and efficiently converts hcs polyester fibre, cellulose and microfibres into carded fiber.

The following model of the machine is of particular interest to our contractors, who produce, among other things, bedroom pillows, decorative pillows, furniture pillows and teddy bears. The machine is distinguished by its ease of use, large raw material hopper, continuous operation and efficiency. The technology used makes the machine completely safe. The AM-531 is a guarantee of satisfaction with the end product.

Vacuum packing machine for pillows, quilts and other products

It is used for pressing/crushing/squeezing (reducing the volume of products) of soft, fluffy products. Reducing the volume of the product has an impact on the low cost of transport, saving storage space before the goods are dispatched. We are the only manufacturers to use the possibility of setting a constant temperature of the film sealing strip, which affects the repeatability of the seal. The packaging process takes place when two buttons are pressed simultaneously with both hands, which causes the pneumatic cylinders to descend to the lower position, and the footswitch to lower the heating strip at a later stage. In this extremely simple way, we can reduce the volume of the product by up to a few per cent.

The line includes:

• Buffer tank
• Raw material weighing system
• Two vacuum packing stations
• Control system for the entire assembly including HMI touch panel

The buffer tank is filled automatically by the upstream machine, e.g. carding machine, ball fibre machine, foam shredding machine, etc. A product sensor located at the top of the tank, by detecting the raw material, can automatically stop the feed from the upstream machine. The fill size is selected from the touch panel. The most efficient operation of the machine is during the filling of pillows weighing between 500 g and 1,000 g. After weighing out a preset amount of pillow fill, the raw material is sucked inside the pillow. Two filling stations allow to maintain the production continuity. While at the first station the filling of the cover takes place, at the same time, at the other station the pillow is waiting to be replaced. The filling stations open and close automatically using pneumatics and are triggered manually with two buttons by the operator.

Pillows can be filled with:

• silicone carded fibers
• ball fibers
• polyurethane foam stick
• foam granules
• mixes or anything loose

The following is a machine designed to fill garden pillows, furniture pillows ranging from backrests to seat pillows, teddy bears, beddings to bedroom pillows.

The set is equipped with two work tables with weight control of the final product. Pillows ranging in size from small to the largest can be stuffed and weighed quickly and easily. The process of stuffing the pillows is under control of the operator. Pressing the footswitch starts the ejection of the raw material (ball fibers, carded fibers, foam sticks and foam granules to other loose fillers). It is possible to connect another machine from our range, which can even feed the raw material automatically. The line is safe to use, fully efficient and has intuitive panels.