CLIC ASSIST mounting aid:
10 gliders in one go
The Clic Assist easy-click system from HINNO enables you to click up to ten original Clic gliders into the curtain track at the same time. This saves up to 95% time when hanging curtains and drapes – during initial installation as well as after cleaning curtains.
The Clic Assist mounting aid is available for Clic gliders with transverse eyelets and longitudinal eyelets. See videos showing both applications below.
Simple handling
The gliders can be easily and conveniently inserted into the click-in aid already at the work table. This means that the complete curtain can be fitted with Clic Assist “ready-to-install” in advance.
Once on the ladder, click the gliders into the track 10 by 10. One hand is sufficient for this, the other can hold on to the ladder for stability.
Work safer
Significantly shorter installation times on the ladder, as well as the ability to operate Clic Assist one-handedly, also contributes to greater workplace safety when hanging curtains – especially for staff and cleaners working alone.
In addition to the clear time-saving benefits, interior decorators skilled at keeping their balance on the assembly ladder also appreciate the additional plus in terms of job safety!

Faster on track: CLIC PANEL for panel curtains
with hemstitch or with velcro/velour tape
HINNO’s innovative Clic Panel systems offer a number of advantages that make handling panel curtains much easier:
• Installation in seconds: thanks to the original Clic gliders, the panel curtains can be clicked into the curtain track at any point. The tedious threading procedure is eliminated – just two clicks per curtain panel, and it´s done.
• Space-saving: In addition to the classic parallel installation of the panels, a space-saving diagonal arrangement in just two curtain rails is also possible.
• Perfect running smoothness: The original Clic gliders from HINNO also show off their advantages with Clic Panel and exhibit excellent gliding properties when opening and closing the curtain panels.
• High stability: Clic Panel systems show extreme dimensional stability, high functionality and are elegant in appearance.
Clic Panel is exactly matched to the original HINNO Clic curtain gliders. The gliders are freely selectable according to the respective system and the size of the curtain track.
Available as individual elements or as a set, variant for excess lengths

Clic Release Ausklinkzange mit ganzen und halben
Stanzköpfen für exakte Stanzungen in jeder Arbeitssituation
• Für alle gängigen Schienensysteme
• Stanzköpfe mit halbem Stempel und ganzem Stempel
• Einfaches Rüsten und Wechseln der Stanzköpfe
• Einhand-Ausklinkung dank geringer Griffspreizung
• Flexibel ausrichtbare Stanzköpfe, ausklinken in jeder Position möglich
• Beim Einsatz von halben Stanzköpfen an bereits montierten Vorhangschienen rastet für die Ausklinkung der zweiten Hälfte eine gefederte Messing-Zentrierung in die bereits ausgestanzte erste Aussparung und stellt dadurch ein exakte Positionierung sicher.
Im Zubehör ist ein Werkzeugkoffer erhältlich, der die Ausklinkzange samt Stanzköpfen sicher, kompakt und übersichtlich verwahrt.

Simply ’click‘ curtains instead of threading them in!
The original Clic glider from HINNO was the first curtain glider ever to allow curtains to be quickly and easily clicked into the curtain track. Thanks to Swiss precision and quality standards, the original Clic glider remains unmatched to this day. Around the original Clic curtain glider HINNO has developed an innovative complete solution for curtain accessories.
• Original Clic curtain gliders and hooks
The original Clic curtain glider is also available pre-assembled with hooks. It is characterized - like all HINNO products - by excellent material properties, high functionality and durability. It is manufactured with 100% green electricity, and HINNO also focuses on sustainability in the self-service area with product packaging made of recyclable paper instead of plastic bags.
HINNO Clic curtain gliders and hooks are available for all common track sizes and applications.

• Clic Assist mounting aid
With Clic Assist, up to ten gliders can be clicked into the curtain track at the same time. The time required for curtain installation on site is fundamentally reduced.

• Clic Loop loop tab-top gliders
Open or closeable, also pre-assembled with gliders, for all common track sizes

• Clic Stop locking/intermediate locking device
The barely visible Clic Stop is clicked into the rail in three quick steps at any desired position in the curtain track as an intermediate stop or before the last curtain glider as a stop. For all common track sizes.

• Clic Clean track cleaner
For removing paint or plaster splashes in the installed curtain track due to previous painting or plastering work. For all common rail sizes.

CLIC ASSIST mounting aid:
10 gliders in one go
The Clic Assist easy-click system from HINNO enables you to click up to ten original Clic gliders into the curtain track at the same time. This saves up to 95% time when hanging curtains and drapes – during initial installation as well as after cleaning curtains.
The Clic Assist mounting aid is available for Clic gliders with transverse eyelets and longitudinal eyelets. See videos showing both applications below.
Simple handling
The gliders can be easily and conveniently inserted into the click-in aid already at the work table. This means that the complete curtain can be fitted with Clic Assist “ready-to-install” in advance.
Once on the ladder, click the gliders into the track 10 by 10. One hand is sufficient for this, the other can hold on to the ladder for stability.
Work safer
Significantly shorter installation times on the ladder, as well as the ability to operate Clic Assist one-handedly, also contributes to greater workplace safety when hanging curtains – especially for staff and cleaners working alone.
In addition to the clear time-saving benefits, interior decorators skilled at keeping their balance on the assembly ladder also appreciate the additional plus in terms of job safety!

Faster on track: CLIC PANEL for panel curtains
with hemstitch or with velcro/velour tape
HINNO’s innovative Clic Panel systems offer a number of advantages that make handling panel curtains much easier:
• Installation in seconds: thanks to the original Clic gliders, the panel curtains can be clicked into the curtain track at any point. The tedious threading procedure is eliminated – just two clicks per curtain panel, and it´s done.
• Space-saving: In addition to the classic parallel installation of the panels, a space-saving diagonal arrangement in just two curtain rails is also possible.
• Perfect running smoothness: The original Clic gliders from HINNO also show off their advantages with Clic Panel and exhibit excellent gliding properties when opening and closing the curtain panels.
• High stability: Clic Panel systems show extreme dimensional stability, high functionality and are elegant in appearance.
Clic Panel is exactly matched to the original HINNO Clic curtain gliders. The gliders are freely selectable according to the respective system and the size of the curtain track.
Available as individual elements or as a set, variant for excess lengths

Clic Release Ausklinkzange mit ganzen und halben
Stanzköpfen für exakte Stanzungen in jeder Arbeitssituation
• Für alle gängigen Schienensysteme
• Stanzköpfe mit halbem Stempel und ganzem Stempel
• Einfaches Rüsten und Wechseln der Stanzköpfe
• Einhand-Ausklinkung dank geringer Griffspreizung
• Flexibel ausrichtbare Stanzköpfe, ausklinken in jeder Position möglich
• Beim Einsatz von halben Stanzköpfen an bereits montierten Vorhangschienen rastet für die Ausklinkung der zweiten Hälfte eine gefederte Messing-Zentrierung in die bereits ausgestanzte erste Aussparung und stellt dadurch ein exakte Positionierung sicher.
Im Zubehör ist ein Werkzeugkoffer erhältlich, der die Ausklinkzange samt Stanzköpfen sicher, kompakt und übersichtlich verwahrt.